H2O uses some of the best and most advanced equipment in the region. H2O takes great pride in their first class equipment. The wide array of advanced machines in the H2O yard allow us to provide superior and faster service to our customers. Our pump department exclusively uses Smeal Derricks on our pump trucks. Ranging from the quick and agile 3T to the world-best-seller 5T to the super heavy duty 10T, H2O has the equipment to get your job done right.
As the customer you have these resources to employ:
|3T||The 3T is the most economical all around rig on the market today. Low in cost and simplicity in construction makes it one of the best small machines available. The 3T has 6000 lb. capacity. The 3T is designed to fit on a ¾ ton truck or larger. The 3T has a self-supporting mast which eliminates need for a guy cable affording fast and easy setup. The 3T basic rig consists of a 32 ft. telescoping mast, 125 ft. of 3/8 NSNR cable, 2 and 3 part line block, open spelter socket with a 3 ton safety hook and hydraulic outriggers.|
|4T||The 4T is designed for the pump man who requires speed in his operation. The 4T is designed with a self-supporting mast which eliminates the need for guy cables. The load is supported by two
3 ½"x48" double acting cylinders. Maximum layback on the 4T is 10 ft. back of the truck to allow easy access to hard to get to pumps or pump houses. The 4T basic rig consists of a 35 ft. telescoping mast, 6000 lb. capacity, 150' of 3/8" NSNR cable with a swaged socket, 3 ton swivel safety hook, block for a 2 or 3 part line reeving and hydraulic outriggers. The 4T will adapt to a ¾ ton truck or larger.
|The 5T is the most popular all around pump hoist on the market today. Its extreme versatility ranges from small submersible pumps all the way to line shaft turbines. The 5T is designed with a self-supporting mast which eliminates the need for guy cables. The load is supported by two 3 ½"x48" double acting cylinders. Maximum layback on the 5T is 11 ft. back of the truck to allow easy access to hard to get to pumps or pump houses. The 5T basic rig consists of a 36 ft. telescoping mast, 12,000 lb. capacity, 220 ft. of 7/16" NSNR cable with an open speltered socket, 4 ½ ton swivel safety hook, block for 2-3 or 4 part line reeving and hydraulic outriggers. The 5T will adapt to a 1 ton truck or larger.|
|6T||The 6T derrick is designed to the same high quality in engineering and durability as the Smeal 5T which made the 5T the largest selling pump hoist in the world. The 6T features the latest technology in its high efficient hydraulic system, plus its rugged construction will set the 6T in a class right alongside the famous Smeal 5T.|
|10T||The 10T basic rig consists of a 36 ft. telescoping mast with 11' maximum layback, 27,000 lbs. capacity with a 3 part line, 150' of 5/8 cable, open spelter socket with 7 ton safety hook, two blocks, and a 15 ton safety hook for a three part line, dual rear independently controlled hydraulic outriggers and tailout winch.|
- Down Hole Camera Equipment
- Well Brushes
- Casing Jacks
- Test Pumps (10 - 1000 GPM)
- Level Logger
H2O can pursue ambitious Industrial and Commercial drilling projects because of the experience and skill of our employees as well as the technology found on our drill rigs.
- All of our drill rigs are top head drive and utilize high pressure air for smooth and efficient drilling.
- H2O is one of the few companies in the region with casing hammer equipped drill rigs. All of H2O's drill rigs are equipped with Atlas Hydraulic Casing Hammers to get the job done better and faster.
- H2O is also equipped for mud rotary drilling to handle the most difficult jobs.
- Our rigs can drill 6" - 18" wells.
H2O utilizes the following drill rigs:
|(2) Gefco 25K|
|Gefco 30K DH||The Gefco 30K DH can drill to depth of 1500 ft. and is equipped with Big Air, 1050 cfm @ 350 psi.|
|Reichdrill 650 WS|
- Air Operated Casing Perforator (For use w/ 6"- 12" casing)
- Downhole Casing Cutters ( 6" - 8" casing)
- 3 sets of Casing Jacks (50 Ton, 150 Ton, and 200 Ton)
This page created by Jake Richardson
Copyright 2005 H2O Well Service This page last updated 05.07.06
1-800-772-4901 582 W. Hayden Avenue, Hayden Lake, Idaho 83835